Need some help in the Fresno/Clovis area

[77broncodriver]

Im living in fresno going to fresno state so I don't have any tools or anyway to work on my bronco. The rear end is making some really weird noises and vibrating pretty bad. It was rebuilt a couple years ago and put new bearings in 6 months ago.



Im hoping someone in the area would let me come over and help me out. Wanting to pull the axle shafts and see if the bearings went out again.



If anyone has any free time Ill bring some lunch or something with me.

[Henry66]

Re: Need some help in the Fresno/Clovis area

Like many I am sure. just too far away. Hang in there... somebody will chime in.

[Cheesenip73]

Re: Need some help in the Fresno/Clovis area

Hi,
Sounds odd to have it rebuilt only a few years ago, then new bearings 6 months ago and then they would be out again? In my experience, bearings last a LONG time. Are you sure you have fluid in it?

unbalanced tires?
driveline?

[Broncrick]

Re: Need some help in the Fresno/Clovis area

Driveline, bad cv? ujoints? sound/vibration can transmit...

[Wade]

Re: Need some help in the Fresno/Clovis area

I'm thinking u joints. I'd drop the driveline and lock the front hubs and drive around the block. Then let us know what your hearing. I'm up by Millerton but won't be home this weekend.
There is a NOLB meeting at Blackbeards Friday at 6:30. Bring it there and someone will help find the problem.

[TRAILBOUND]

Re: Need some help in the Fresno/Clovis area

Wade what's NOLB?

I'm just down the street from campus right off millbrook. I don't have any power tools but I agree with the rest of the guys on driveline.

shoot me a text
209-918-0142

[Holt75]

Re: Need some help in the Fresno/Clovis area

Sending you a text. See if I can help ya tomorrow.

[Wade]

Re: Need some help in the Fresno/Clovis area

NOLB. No one left behind 4x4 club. Part of Cal4wheeldrive

[TRAILBOUND]

Re: Need some help in the Fresno/Clovis area

NOLB. No one left behind 4x4 club. Part of Cal4wheeldrive

Nice!

[Wade]

Re: Need some help in the Fresno/Clovis area

Nice!

You should come. It will be my first meet with them. I'm looking for a group that (no offence) meets! They do lots of stuff. Check out their FB page.

[77broncodriver]

Re: Need some help in the Fresno/Clovis area

I forgot to subscribe to the thread, just saw all of your guys posts. I will pull the driveshaft out and see if that gets rid of the noises

[TRAILBOUND]

Re: Need some help in the Fresno/Clovis area

If it doesn't work, give me a call/text and we can get it figured out.
While your under there give your output shaft a good shake.

[77broncodriver]

Re: Need some help in the Fresno/Clovis area

I'll try to look at it at some point tmr and then get in contact with you if I will need some help