Announcement

Collapse
No announcement yet.

Engines

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Engines

    I have a few engines and more that need to go.....moving soon.

    1. 89 mustang 5.0 shortblock. Needs rebuild and has been sitting exposed to elements for a few years. Forged pistons. Free come get it

    2. 89 mustang 5.0 long block with upper and lower intake. unknown miles. $300



    4. 91 460 shortblock supposedly low miles possible have accesories and brackets if i can find them. $300

    5. 89 mustang aod ahave been sitting out side could use rebuild $200

    6. big block 4x4 aode from 460 above. $300

    7. big block 4x4 c6 has been sitting outside could use rebuild. $200

    8. 1 ton borgwarner t case off aode $100

    9. eb width hp44 housing inner knuckle to knuckle. may need one knucke turned to line up true. spliced in center of longside. May have 4.10 gears and axleshafts need to check $200

    10. Set of big o tires 31's i think with 90% tread on steel rims 5x5.5 $300

    I have misc. flywheels


    I will add more soon
    Last edited by bent70; 06-24-2016, 03:53 PM. Reason: adding content
    70 eb 60f 14b mild 302 435-klune 4-1-np205 and some dents

  • #2
    Re: Engines

    Added a bunch of stuff
    70 eb 60f 14b mild 302 435-klune 4-1-np205 and some dents

    Comment


    • #3
      Re: Engines

      Is the high pinion a cast C or welded? I may be interested.
      Marc D.
      If you drive with rage, drive a cage.

      Comment


      • #4
        Re: Engines

        Cast.
        I instsalled it under my old grand Cherokee, but the project stslled out and sold. Im not 100% the castor is the same side to side or if it was bad balljoints throwing the wheel out of whack.
        I would just retube it if i was going to use it then you'll get a clean slate
        Last edited by bent70; 06-07-2016, 11:43 AM.
        70 eb 60f 14b mild 302 435-klune 4-1-np205 and some dents

        Comment


        • #5
          Re: Engines

          Can you use the tubes from a low pinion on a high pinion.
          Marc D.
          If you drive with rage, drive a cage.

          Comment


          • #6
            Re: Engines

            Originally posted by earlybronco72 View Post
            Can you use the tubes from a low pinion on a high pinion.
            Yes! As long as they are the same diameter they will work.
            SOLD: 1975 Ford Bronco: 105" wheelbase, King 14" c/o shocks, King 2" air bumps w/ Duff arms, 4 link rear w/ coils. Fuel injected 408W, ZF 5 speed/Atlas II(4.3) and Dana 60/70 axles with 5.13 gears and ARB's, 41.5/13.5R17 Pitbull Rockers on 17" Raceline Monsters.

            Comment


            • #7
              Re: Engines

              Ill try and chech tomorrow.
              70 eb 60f 14b mild 302 435-klune 4-1-np205 and some dents

              Comment


              • #8
                Re: Engines

                This was buried. Axle tube is 3"Click image for larger version

Name:	IMG_20160608_104745.jpg
Views:	1
Size:	558.4 KB
ID:	274093Click image for larger version

Name:	IMG_20160608_104807.jpg
Views:	1
Size:	639.9 KB
ID:	274094
                70 eb 60f 14b mild 302 435-klune 4-1-np205 and some dents

                Comment


                • #9
                  Re: Engines

                  Btt......these are obo too. Im moved out july 15
                  70 eb 60f 14b mild 302 435-klune 4-1-np205 and some dents

                  Comment


                  • #10
                    Re: Engines

                    Everything half off....don't want to store this stuff
                    70 eb 60f 14b mild 302 435-klune 4-1-np205 and some dents

                    Comment


                    • #11
                      Re: Engines

                      Have a pic of #10 31" tires and rims
                      Originally posted by TBS-POPS
                      After a huge amount of reflection, I have determined that what I saw in ukiah was in fact Brians bronco. I was also informed by my wife that she infact heard it run!!

                      Comment


                      • #12
                        Re: Engines

                        I'll get a pic tomorrow. only drove on them for about 1500 miles. chrome spoke rims with peeling clear coat.
                        67 Bronco blue - LS 6.0, 6l90, & atlas (working on it)
                        69 Bronco red - F/I 302,c-4,36" TSL S/X( sitting next to a barn)
                        69 Bronco Yellow - TBI 350,th350, 203/205, Dana 60, 14 bolt, 4-link rear, 3 link front,full hydro, body narrowed 8", 39.9 Iroks on Walker Evans
                        79 CJ 5 360 v8 t18 33's locked & sprung over (sitting in a barn since 2000)
                        67 Camaro Lq4,built 200r4,Hotchkis suspension(work in progre$$)

                        Comment


                        • #13
                          Re: Engines

                          I have one on my jeep using as a roller....just brought it to the delta. So if you want them I can grab it next weekend.
                          70 eb 60f 14b mild 302 435-klune 4-1-np205 and some dents

                          Comment

                          Working...
                          X