Tweet
I need the brackets that bolt to the winshield for a soft top. I need one for each side, it is a small bracket with a hole in it for a rod to slip into. I also need the brackets for the tailgate. The top is a kayline.
-
-
I used some 1/8 flat stock and built mine because I could not find any. Took about 15 min each. I used a plasma to cutthe shape out, but it is straight enough to use a die grinder. Use a 3/8 drill bit on each side of the adjustable protion of the bracket that bolts to the windshield, and then use your die grinder to connect the holes and make a nice adjustable slot. THen use a vice and a hammer to break the needed 90 degree bend. If you need to get some pics and measurements, let me know.“I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it.” TJ -
I've actually got one I don't need. I will try to get a picture of it to you tomorrow.Comment
-
The one I have is a one peice unit?Mark Harris
71 Bronco, 9 inch, 60, c4, Stak 3 speed, and 42 inch balloons.Comment
Comment