Rock Eater Geared Dana 20 4.86:1

[NOTPRETTY]

I'm selling my dana 20 with rock eater gears

Fully rebuilt by a professional of 30+ years

Questions go2camp@comcast.net or 916-717-4316

$1700.00 0B0...includes the WH HD rear output shaft

Here are the details on craigs:

http://sacramento.craigslist.org/pts/999721896.html

[kwspony]

Re: Rock Eater Geared Dana 20 4.86:1

I hope uncle sam is good to me this year. If so, I might take it if it is still around when my taxes come back.

[CityHick]

Re: Rock Eater Geared Dana 20 4.86:1

Hmm.... that would go good with the front axle that same t-case used to supply power to!
Who am I kidding - I have no desire to tear into my rig's running gear again anytime soon. Looks like a good deal though Marlon! Somebody should snap this one up.

So what are the details on this rock buggy you're building????

[NOTPRETTY]

Re: Rock Eater Geared Dana 20 4.86:1

Full disclosure...the rear HD Wild Horses output shaft is a bit longer then stock. You might need to cut down the rear d-line.

Details..., its a black ops type of thing...I'd have to kill you after telling you.

JK



Hey...hows the front axle doing?

[NOTPRETTY]

Re: Rock Eater Geared Dana 20 4.86:1

I need a NP435 to dana 20 adapter. I have the old school modified 3 speed adapter that Jim Creel use to sell. Back then he cut off the back part of a three speed adapter and welded on a 1" machined plate. So...if you have one laying around, please let me know.

Oh...Front has to be square bolt pattern for the NP 435.

[CityHick]

Re: Rock Eater Geared Dana 20 4.86:1

Hey...hows the front axle doing?

Great! I've not yet taken it wheeling but I am driving on it again (finally). It sat on a pair of jack stands for several months after I bought it from you, went under the rig when I did my lift and did nothing other than to serve as a way to roll my rig around before I could drive it until very recently.

I've now locked the hubs a few times and done some "light" wheeling but nothing that really counts as wheeling. I've tested the ARB with my home compressor but do not yet have OBA.

I feel confident that the shafts and CTM joints you installed, that it will serve me well for a long time! Now if I could just finish the countless other little projects and WHEEL I'd be really happy.

[NOTPRETTY]

Re: Rock Eater Geared Dana 20 4.86:1

Check the wheel bearings. After sitting that long I'm concerned about rust forming from winter wheeling. They were recently done...so you should be fine, but check.

[CityHick]

Re: Rock Eater Geared Dana 20 4.86:1

Checking the bearings, seals, etc is definitely on the list of things to do. I was planning to tear into the front end a little just to mainly do maintenance and check the ball joints and stuff pretty soon. Its been sitting inside but definitely worth checking.

I'll end my hijack of your sale ad here!
-Tony

[Daddy4zack]

Re: Rock Eater Geared Dana 20 4.86:1

mmmm I want that D20....

[blwngsket]

Re: Rock Eater Geared Dana 20 4.86:1

Come on Aaron. You know you need some super low gears....

[Cheesenip73]

Re: Rock Eater Geared Dana 20 4.86:1

replied in a pm

[NOTPRETTY]

Re: Rock Eater Geared Dana 20 4.86:1

mmmm I want that D20....

Is this a...I want but can't...or I really want?

beerchug:

[santa]

Re: Rock Eater Geared Dana 20 4.86:1

This would go perfect with my klune, but drain the savings account

wait 431:1 I'd never use it

[Broncrick]

Re: Rock Eater Geared Dana 20 4.86:1

Ok Marlon, I'm interested. First inline here I guess with cash, assuming you still take that :flipoff2: . I'll call ya Mon when I get back from San Diego. If things change before then please call me 916.997.3479

[NOTPRETTY]

Re: Rock Eater Geared Dana 20 4.86:1

Ok Marlon, I'm interested. First inline here I guess with cash, assuming you still take that :flipoff2: . I'll call ya Mon when I get back from San Diego. If things change before then please call me 916.997.3479

Sounds good. I'm 916-717-4316.

Marlon