Announcement

Collapse
No announcement yet.

Frame height with 42s

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Frame height with 42s

    I got mine down to 24" but probably gonna go back up as it looks too low to me.

    What frame height to tire are y'all running. Coils all around for me 4" forward and rear.

  • #2
    Re: Frame height with 42s

    Mine is at 24” belly height. Even with a tall cage it clears a standard 78” garage door opening. 41.5” Pitbull Rocker Radials.
    SOLD: 1975 Ford Bronco: 105" wheelbase, King 14" c/o shocks, King 2" air bumps w/ Duff arms, 4 link rear w/ coils. Fuel injected 408W, ZF 5 speed/Atlas II(4.3) and Dana 60/70 axles with 5.13 gears and ARB's, 41.5/13.5R17 Pitbull Rockers on 17" Raceline Monsters.

    Comment


    • #3
      Re: Frame height with 42s

      24" at belly height?? Explain belly height measurement? Can you roll a creeper under it??? That is low!

      Mine is measured at the frame rail 1" behind the frame horn bumper mounting bolt holes front and rear. Btw frt axle tube to frame I have 9 1/4". Rear axle tube to frame is 10 1/4".

      ORI's on each corner.

      6" up travel front and back

      Mine frame is sitting 28" off the floor w/ 40"s at 22psi

      Comment


      • #4
        Re: Frame height with 42s

        Might be he's got his Atlas clocked up to be above the frame? Or maybe he meant at the lowest point.
        Interested to hear as well.

        Paul
        Wild Horses 4-Wheel Drive
        www.wildhorses4x4.com

        71 U15 3.5" WH lift, Hanson rear, cut w/33" Swamper Thornbirds
        68 U15 2.5" WH lift, Hanson front, uncut w/31 BFG Explorer engine/trans

        Comment

        Working...
        X