I just got back from the 'Con and decided since I won't be running alot in the snow this year that I should cut off the front end (atleast all the sheet metal). Well thats about done and all the wiring and stuff are on the motor, now for my question - how many of you have tubed the front ends? Where did you tie it into the frame ? and if you could post some pics it would be greatly appreciated.
My plan right now is to bend some 2" tube and tie it on both sides of the radiator and run it out to the sides of the inner fender. Tie that tube to the shock hoops and probably to my rock ski's. Then brace it accross the motor with bushing assemblies so it could be removed. I don't plan on changing the suspension right now but I will try to locate the set-up if I chose to go to coil-overs in the future. Thanks for the help. FM
One more thought -Would you make the whole thing removable ?
My plan right now is to bend some 2" tube and tie it on both sides of the radiator and run it out to the sides of the inner fender. Tie that tube to the shock hoops and probably to my rock ski's. Then brace it accross the motor with bushing assemblies so it could be removed. I don't plan on changing the suspension right now but I will try to locate the set-up if I chose to go to coil-overs in the future. Thanks for the help. FM
One more thought -Would you make the whole thing removable ?
Comment