If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
My 66 keeps getting stuck between gears, It has a hurst floor shift. It either locks in R-1 or 2-3 any ideas? All of a sudden my 69 is stuck in neutral! Same B.S. Can you guys help me ?
Thanks Jim
69 bronco 302 670 holley TA NV4500/Atlas 3.8 29 spl. in 32 out 4.5 bc lift 3" body D44 Locked - 9" Currie/strange with daytona PS and 1350 yoke. Warn full floater Locked 35" MTR's beadlocked 4 wheel disc most parts are still on shelf, But 1 day
Well after a little messing around I figured out why my shifter was locking in gear, The linkage needed to be adjusted. All it took was a 1/4" drill bit to center the shifter, Then remove and adjust the rods seperately with trans in neutral. Pretty damn simple considering all the B.S. it gave me, Finally got to drive it. Jim
69 bronco 302 670 holley TA NV4500/Atlas 3.8 29 spl. in 32 out 4.5 bc lift 3" body D44 Locked - 9" Currie/strange with daytona PS and 1350 yoke. Warn full floater Locked 35" MTR's beadlocked 4 wheel disc most parts are still on shelf, But 1 day
Comment