If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Anyone tapped a F150/Bronco box from the 77-79 or whatever for hydro assist?
Need pics of exactly where for one to go into a EB frame.
I'm no help on the tapping location, and if you are talking about the location on the frame where to mount the box, I found where my coil buckets would be located, mounted the track bar mount right in front of them, and then snugged the box in as close as I could get it.
The F-150 4x4 box doesn't have a front cap. I don't know about the stock Bronco box though.
Those caps are for Saginaw boxes. The stock Bronco power steering gear is the only Saginaw box that Ford ever purchased. Most Saginaw's are found in Chevy or Dodge trucks, and maybe Nissan.
SOLD: 1975 Ford Bronco: 105" wheelbase, King 14" c/o shocks, King 2" air bumps w/ Duff arms, 4 link rear w/ coils. Fuel injected 408W, ZF 5 speed/Atlas II(4.3) and Dana 60/70 axles with 5.13 gears and ARB's, 41.5/13.5R17 Pitbull Rockers on 17" Raceline Monsters.
Comment