If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
So whats left to do? I ran in to a little snag myself, I drove the bronco down to the future inlaws for dinner and on the way home the thermostat gasket blew out. Not a big problem just have to run to Prather for a gasket.
69, 342 EFI, C4, NP203, D20, 4.5" SL, 2" BL, 4.88 9" 35 spline ARB, 4.88 HP D44, WAH, ARB, CTM's, front disc , 37 x 14.50 Toyo MT, Ram Assist, and rear 4-link
I need to weld on some little tabs to hold the brake lines and weld a brace to the hydraulic clutch mount. Then it's just reinstall everything from the spindles out.
My little snag yesterday was I needed to find a taller 90* elbow to put on the hydraulic line coming out of the ram. Everything is such a tight fit with the short high steer arms that I have. Anyway, I found what might be a good temporary fix at Napa to raise that elbow up a bit to where it might clear everything.
Then put the coil springs back in and install shocks.
Well, she is one the ground and I took her for a quick spin tonight. It was too dark to get any pics, but I'll get some tomorrow.
My brother wants to come along too. He gets off at 4:30 and will leave straight from work. I will meet up with him and head up the hill, so we could be at your place around 5:30. Will that work for you?
Well, she is one the ground and I took her for a quick spin tonight. It was too dark to get any pics, but I'll get some tomorrow.
My brother wants to come along too. He gets off at 4:30 and will leave straight from work. I will meet up with him and head up the hill, so we could be at your place around 5:30. Will that work for you?
That works for me I will see you then Let me know if anything changes.
69, 342 EFI, C4, NP203, D20, 4.5" SL, 2" BL, 4.88 9" 35 spline ARB, 4.88 HP D44, WAH, ARB, CTM's, front disc , 37 x 14.50 Toyo MT, Ram Assist, and rear 4-link
Comment